• » Product description
  • » Technical data
  • » Modules
  • » Video

Product description

Model Dürselen PB.16 can be used for virtually any paper drilling application and offers a unique upgrade path. The strong cast iron contsruction combined with the cam driven linear stroke movement ensure long and accurate service without drill bit breakage.

As a standard feature the machine comes with a manually operated sliding table. A program trim with seven different hole patterns allows much more than only standard paper drilling jobs without any additional accessories needed.

For complex paper drilling applications and large paper sizes model Dürselen PB.16 can be equipped with different upgrade modules. They can be retrofitted on-site and are available as required to meet new applications.

Technical data

Standard configuration and
und basic data for all versions:

  • 4 drill heads, up to 15 drill heads and special multi-spindle drill heads as retrofits
  • Drill belt as drilling support
  • Cooling and lubrication system for paper drill bits
  • Spine margin behind drill bits 50 mm / 2"
  • Hole distance 31,7 mm - 420 mm / 1 1/4" - 16 1/2",
    with multi-spindle heads down to 19,05 mm / 3/4",
    using the sliding table down to 7 mm
  • Hole patterns selectable by program trims, one trim with all common hole patterns is included
  • Size of sliding table 450 mm / 17 1/2" width x 320 mm / 12 1/2" depths
  • Travelling distance of sliding table 310 mm / 12 1/4"
  • Paper drill bit diameters 3 - 14 mm / 1/8" - 5/8", with special drill heads up to 38 mm / 1 1/2"
  • Pile height up to 50 mm / 2"
  • Space requirements 950 mm / 37 1/2" wide x 890 mm / 35" deep x 1.420 mm / 56" high
  • Power requirements 400 volts, 3 phases, 50 cycles, 16 A, 3 kW (4 HP)
  • Compressed air consumption for cooling and lubrication 100 litres per minute at 2 bar pressure

Modules

Module programmable sliding table:

  • Store and recall any No. of programs
  • Easy programming of any hole pattern via touch screen
  • Hole distance 1 - 420 mm / 3/64" - 16 1/2"
  • Size of sliding table 450 mm / 17 1/2" wide x 320 mm / 12 1/2" deep
  • Travelling distance of sliding table 310 mm / 12 1/2"


Module back table with manual back stop:

  • Throat depth behind drill bits 300 mm / 12"
  • Paper sizes up to 450 x 300 mm / 17 1/2" x 12"
  • Manual depth setting using counter unit
  • Side setting via drill heads


Module back table with programmable back stop:

  • Store and recall any No. of programs
  • Easy programming of any hole pattern via touch screen
  • Throat depth behind drill bits 300 mm / 12"
  • Paper sizes up to 450 x 300 mm / 17 1/2" x 12"
  • Depth setting touch screen programmed by motorised back stop
  • Side setting via drill heads

Video

Drilling narrow hole spacings - Paper drill PB.16 with motorised sliding table

Paper drilling machine PB.16 with electrical sliding table - for narrow hole spacing like mechanical binding / wire-comb binding